Fri. Jan 10th, 2025
Strategies to Troubleshoot Your Backyard Irrigation System

Underground yard and panorama irrigation strategies might seem tough, however understanding significantly relating to the system will permit you to perceive (and troubleshoot) any factors that come up.

More often than not, it is potential to revive these factors your self—however step one is to find out the provision of the issue, which you will solely do everytime you perceive the irrigation system’s components and one of the simplest ways they work collectively.

Earlier than You Start

An in-ground yard sprinkler system consists of numerous components. A water current pipe from the principle water present will first switch correct proper right into a valve topic at floor stage. From there, it is divided into specific particular person underground irrigation zones, every managed by its non-public zone valve. These are automated by an digital controller, which objects the time and interval of every watering session with low-voltage wires.

Most properties have a minimal of two or three irrigation zones, however some smaller properties might solely have one.

The zone valves themselves are made up of a diaphragm that controls the movement of water, which opens and closes based completely on indicators obtained by a solenoid mounted on the zone valve. The solenoid controls a spring-loaded steel piston that opens or closes the water port passing by means of the valve.

Some irrigation zone valve fashions may combine an anti-siphon gadget. In a number of strategies, the anti-siphon valve is a separate gadget that’s put in on the water pipe earlier than it reaches the valve topic.

When a zone valve opens, water flows by means of underground plastic tubing to feed sprinkler heads that pop up and distribute water to the yard and panorama when the controller opens them up.

Quite a few frequent indicators can degree out an issue collectively collectively together with your irrigation system:

  • Particular particular person sprinkler heads not working
  • Low water strain on the sprinkler heads
  • Sprinkler zones don’t activate
  • Leaking spherical a zone valve
  • Leak on the sprinkler head furthest from the valve

Tip

Verify for factors by manually testing your sprinkler system. Run a single zone for a couple of minutes everytime you look for factors with the system.

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *