What to Do When Your Freezer Is Not Freezing—10 Easy Fixes to Try

A freezer that’s not freezing can shortly result in spoiled mealsinflicting a giant mess and a giant expense. In case you uncover your freezer is struggling to freeze gadgets, act now earlier than it’s too late. Some freezer elements are easy, like a blocked evaporator fan, and others are further tough, akin to defective parts. The optimum temperature of a freezer is 0 ranges Fahrenheit.

In case your freezer is struggling to loosen up all the best way through which all the best way all the way down to zero ranges, listed beneath are some potential freezer factors and selections.

10 Causes Why Your Freezer Is Not Freezing and Selections

Need further residence reno mission ideas and inspiration? Be part of our free day-after-day e-newsletter for the newest how-tos, reno guides, and extra!

Unsuitable Settings

A couple of of the frequent causes that freezers wrestle to freeze gadgets is that the freezer temperature or one completely different setting is about improperly.

Reply: Regulate Settings

Regulate your freezer’s settings, following the producer’s directions for the fitting settings. Many freezers have a extraordinarily useful temperature setting, nonetheless you would possibly uncover that you just simply merely favor a colder setting for sure meals storage needs.

Unhealthy Door Seal

Even when your freezer is functionally sound, a foul door seal will shortly set off elements that can cease your freezer from freezing meals.

Reply: Clear or Commerce Door Seal

In case your freezer’s door seal is compromised, akin to falling off, ripped, or in one other case broken, you may possibly should buy and prepare a mannequin new one. Nonetheless, it could merely should be cleaned. Take away any buildup of grime or frost on each the door seal and the freezer.

Soiled Condenser Coils

Your freezer’s condenser coils are typically situated on the as soon as extra close to the underside, although the precise place would possibly fluctuate from mannequin to mannequin. Due to the outside location, condenser coils are weak to getting soiled and clogged with mud and fully completely different particles. As shortly as clogged, your freezer can wrestle to loosen up down appropriately, resulting in meals not being frozen.

Reply: Clear Coils

Make a conduct of ceaselessly checking your freezer’s condenser coil and cleansing off mud earlier than an excessive amount of accumulates.

To wash the coils, observe these steps:

1. Unplug the freezer.
2. Take away any exterior covers.
3. Use a vacuum and a comfortable bristle brush to take away the mud from the coils, being cautious to not dent or bend the coils.
4. Commerce the covers and plug contained in the freezer.

Frost Buildup

Moisture in chest-type or upright freezers will shortly freeze, resulting in frost buildup on meals, alongside the door seal, and spherical weak freezer parts. Whereas a bit frost in your meals is not a giant deal, an excessive amount of frost contained in the fallacious spot can shield a freezer from cooling down.

Reply: Run Defrost Cycle

Freezers are designed to ceaselessly defrost, stopping frost from assemble up and inflicting elements. Nonetheless, typically that is not ample to handle the frost at bay. That is when it is good to run a pressured defrost cycle. Comply alongside along with your producer’s directions on suggestions on the fitting option to put your particular freezer in defrost mode.

Defrosting Elements

Normally the rationale for the frost is a matter with the defrost perform of the freezer, which suggests chances are high you may’t even take away it by working a pressured defrost cycle.

Reply: Manually Defrost Freezer

In case your freezer’s defrost perform is not working, it’s a must to manually defrost the freezer by unplugging it till the frost melts, then eradicating any water earlier than turning it as soon as extra on. You will possibly have to put your meals in a single completely different freezer or cooler contained in the meantime.

Defective Thermistor

A freezer’s thermistor is among the many many most important parts for the cooling cycle. It screens the freezer’s temperature and tells the compressor when to activate and off to loosen up it down, much like a thermostat’s relationship with an HVAC system. If the thermistor breaks, the freezer is not going to sit back appropriately.

Reply: Commerce the Thermistor

Fortunately, freezer thermistors are typically low value and comparatively simple to commerce.

To commerce your freezer’s thermistor, observe these steps:

1. Unplug the freezer.
2. Take away any obligatory cabinets and covers.
3. Uncover the thermistor. It is typically beneath a plastic cowl on the wall or ceiling of the freezer.
4. Take away the thermistor by disconnecting any {{{hardware}}} and wires.
5. Organize the mannequin new thermistor.
6. Commerce any covers and cabinets.
7. Plug contained in the freezer.

Damaged Evaporator Fan

A freezer’s evaporator fan circulates the cool air all by way of the freezer. If the evaporator fan goes out, the freezer is not going to sit back appropriately.

Reply: Commerce Evaporator Fan

Evaporator followers are one amongst many biggest parts to commerce on most freezer fashions.

To commerce a freezer evaporator fan, observe these steps:

1. Unplug the freezer.
2. Take away any cabinets and covers.
3. Unplug the evaporator fan.
4. Take away any obligatory clips or screws.
5. Take away the damaged evaporator fan.
6. Organize the mannequin new evaporator fan and plug it in.
7. Commerce any covers and cabinets.
8. Plug contained in the freezer.

Blocked Evaporator Fan

Normally, the evaporator is working, nonetheless its airflow is blocked by meals, stopping the cool air from circulating contained in the freezer.

Reply: Change Blockage

Take away any blockage from the evaporator fan so it would actually larger stream into the chilly air.

Defective Begin Relay

A freezer’s begin relay works together with the thermistor to work together the compressor. When the thermistor senses that the freezer needs to start a cooling cycle, the beginning relay turns the compressor on. An equivalent to a foul thermistor, a defective begin relay could lead you to consider your freezer has a foul compressor.

Reply: Commerce Begin Relay

Fortunately, it is simpler and cheaper to commerce a freezer’s begin relay than its compressor. That’s suggestions on the fitting option to do it:

1. Unplug the freezer.
2. Take away any covers to entry the beginning relay.
3. Pull off any clips holding the beginning relay to the compressor.
4. Disconnect the wiring harness from the beginning relay.
5. Take away the beginning relay.
6. Change the run capacitor from the defective begin relay to the mannequin new begin relay.
7. Organize the mannequin new begin relay and plug contained in the wiring harness.
8. Commerce the duvet and plug contained in the freezer.

Overloaded Freezer

Inserting an excessive amount of meals or meals that is too tightly packed can compromise your freezer’s potential to stream into the chilly air vital to guard meals frozen. It will lead to heat spots contained in the freezer.

Reply: Take away Some Objects

Take away gadgets till the freezer is solely 3/4 full. Put collectively the gadgets to advertise larger airflow so the freezer can distribute chilly air all by way of the inside.

Strategies to Protect a Chilly and Working Freezer

Listed beneath are some ideas for retaining your freezer chilly and functioning appropriately.

• Do not overfill it. Filling your freezer bigger than 75% full can forestall chilly air from effectively circulating all by way of.
• Fill it strategically. Even throughout the event you do not overfill your freezer, chances are high you may compromise the airflow by blocking the evaporator fan. Deal with your freezer to handle the evaporator clear and promote airflow.
• Shield the door seal clear. Make a conduct of ceaselessly checking your freezer’s door seal to make sure it is freed from particles and shutting completely.
• Shield the condenser coil clear. Make a conduct of checking the condenser coil as shortly as a month and eradicating any mud accumulation.
• Carry out a data defrost when obligatory. In case you start to note frost buildup, carry out a data defrost earlier than it ought to get out of hand and begins to set off elements.
• Optimize your freezer’s settings. In case you’ve got received in no way adjusted the settings, you may be hindering your freezer’s potential. Moreover, fallacious settings can run your utility invoice up unnecessarily.